Animalia FOX Diffuser, 60 m²

- Used in rooms up to 60 m²
- Water tank: 80 ml
- Use 5-15 drops of essential oil.
- Use only oils recommended for children.
- Humidifier
- Multicolored
- 5 year's warranty
- Designed and made in France

1) The device must be placed on smooth, horizontal surface.
2) Connect the main adapter to the diffuser, without
plugging it into the mains.
3) Remove the ceramic bell as well as the lid.
4) Use tap water at room temperature (do not use
demineralized water) to fill the reservoir in the base with a
maximum of 80 ml (do not fill higher than the maximum water
level mark.
5) Add between 5 and 15 drops (maximum) of the essential
oils to be diffused to the water.
6) Put first the lid, then the ceramic bell back on the
base.
7) Plug the mains adapter (I) into a mains socket.
8) To turn your Animalia on, press the top of the device. This
gesture will activate the on/off switch on the underside of the
device.

Successively pressing the device will provide several
operating modes:
1st press: diffusion of mist + lights with changing colors.
2nd press: diffusion of mist + fixed light in the last color that
appeared.
3rd press: diffusion of mist without light.
4th press: the device turns off (neither mist nor light).

• UltraSonic (with water)

• 60 m²

• 80 ml

• Multi-coloured light

• Yes, It will automatically turn off when the water tank is empty.

Width 120 x Depth 118 x Height 150 mm

To look after your diffuser, monthly cleaning is ideal. Unplug the device. Use pharmaceutical alcohol or vinegar, heat it to between 40 and 50°C and place it in the water tank. Let the alcohol /vinegar steep for 10 minutes.

Remove the alcohol/vinegar and clean with a cotton swab moistened with this alcohol/vinegar. Do not bother too much with cleaning the membrane, which cleans itself as it vibrates. Rinse with lukewarm water, and wipe a little, without going to the bottom of the tank.

If your diffuser is covered in limescale, use vinegar. Heat the vinegar to 40-50°C and place in the reservoir. Do not switch on the appliance, but leave it to steep for 10 to 15 minutes; remove the liquid and perform a conventional cleaning operation.